A finger on the pulse of your assets.
Strix gives the owner, the CFO and the chief engineer a single real-time picture of the enterprise: revenue, downtime, risk — with no intermediaries and no retold reports.
A full Russian stack for predictive analytics and APC. From sensor to advisor. From signal to economics.
Strix · real dashboard Sound familiar?
Nine out of ten conversations with executives start with one of these situations. If any of this is about you, we have something to show.
Online condition monitoring shows a defect weeks and months before failure — with remaining life visible per asset node. An emergency becomes a planned replacement.
Real-time asset economics: what it produces and earns right now, downtime priced in money, not hours. On your phone, with no requests and no waiting.
The owner, the CFO and the chief engineer look at the same sensor data — just through different screens. One system, one truth, no retold reports.
A portfolio screen: all sites ranked by losses in money, not alphabetically. From the asset map to a specific node and its forecast — in two clicks.
Per-node remaining-life forecasts turn spares purchasing from “just in case” into “by replacement date”. The warehouse holds what will actually be needed — and when it is needed.
Condition-based maintenance instead of the calendar: work is scheduled by actual wear. Across our deployments — up to 40–60 % fewer unplanned repairs.
A worn drive overconsumes long before it fails. Motor current diagnostics shows which motors burn the excess — savings verified by the meter.
Monitoring as a Service (MaaS): a monthly fee out of operating expenses, no equipment purchase. Start with a pilot on one area — the effect is measured before scaling.
The system outputs a diagnosis and a work priority, not spectra — a clear work order for the mechanic. Our diagnostic engineers handle the complex cases and train your team.
Retrofit with no intrusion into the machine: strap-on sensors and current clamps give status, load and wear even for 1980s-era machines. Monitoring does not require replacing the fleet.
Process stabilisation and optimisation: an APC advisor on top of your existing control system steers the process closer to optimum. More product from the same iron; the operator stays in the loop.
AI models run on your site: local deployment, data never leaves the enterprise perimeter, decisions are confirmed by a human.
Didn’t find your situation? Describe it to us — we’ll discuss the task and tell you honestly what we can help with, and what we can’t.
Three views of one asset.
One pulse — three readings. The owner watches revenue, the CFO counts losses, the chief engineer makes the diagnosis. All three — in one system. Two levels of control underneath: first we stabilise the equipment, then we optimise the process — on one infrastructure.
Revenue, downtime, risk — on your phone, with no intermediaries and no retold reports from the team.
Downtime in dollars, OEE as a financial metric, energy overconsumption. Equipment-as-a-Service: pay for the result, not the CAPEX.
Spectra, RUL, advisor. Full L0–L3 stack — the depth you expect from an industrial vendor.
Start collecting data in the next 30 minutes.
Strix Connect is our software-only OPC UA gateway. One binary, runs on any Linux box — your laptop, a VM, a spare server, a Pi in the cabinet. No PO, no shipping, no commissioning trip. Free for the first 100 tags, forever.
- OPC UA, Modbus TCP/RTU sources
- MQTT, Kafka, REST, OPC UA outputs
- Edge buffer survives connectivity loss
- ≤ 80 MB RAM, single binary
# pull and run
$ docker run -d \
-p 4840:4840 \
-v $PWD/lite.yml:/etc/limantech/lite.yml \
limantech/strix-connect:latest
# in lite.yml — point at your PLC
sources:
- name: pump-14
type: opcua
endpoint: opc.tcp://10.0.5.31:4840
nodes: ["ns=2;s=Vibration", "ns=2;s=Bearing"]
outputs:
- type: mqtt
broker: tcp://broker.local:1883
topic_prefix: factory/
✓ Strix Connect ready · 12 tags · streamingFrom signal to action, in one stack.
Most monitoring tools stop at dashboards. Liman-Tech closes the loop — from the bearing on the floor to the work order on the technician's tablet.
Passer acquisition controllers digitise vibration and motor current at lab-grade fidelity — 8 channels, up to 92 kHz — and stream raw waveforms straight to the edge.
Larus gateways aggregate sensor and PLC data, run edge inference and forward to your cloud, MES, SCADA or CMMS — software-only or hardware appliance.
Strix is the platform that ties it together — analytics, asset twin, computer vision, ranked work orders. Run it in our cloud, your server, or on a Larus appliance.
Software, gateways, sensors — pick your entry point.
Eight products: Passer controllers, Larus gateways, the Strix platform and the LISU HMI. Mix and match — start free, scale to a turnkey appliance.
A software-only OPC UA / Modbus gateway. Install on any Linux server in 30 minutes, stream tag data to MQTT, Kafka, REST or Strix. Free tier for up to 100 tags.
An 8-channel IEPE/ICP vibration data-acquisition controller. Up to 92 kHz per channel. Streams raw signals to a Larus gateway for FFT, envelope, ML inference and SCADA integration.
A multi-channel current acquisition controller for motor signature analysis (MCSA). Captures stator current and voltage at high resolution, streams to Larus for diagnostics — broken bars, eccentricity, bearing faults, load anomalies.
Industrial edge gateway. Ingests raw streams from Passer controllers, computes FFT, envelope, RMS/Peak/Crest factor and runs ML classifiers — then forwards results to your SCADA, MES, CMMS or Strix.
Larus-10 plus an Eclipse 4diac (IEC 61499) runtime for deterministic edge automation. Same diagnostics stack on Passer streams, plus the ability to act locally — interlocks, sequencing, skid-level control.
The Liman-Tech software platform: data fabric, asset twin, analytics and apps for predictive maintenance, computer vision and edge automation. Runs in your cloud, your server, or on a Larus appliance.
LimanISU-Monitor (LISU) — the HMI tier of the platform: a dashboard for the owner, the CFO and the chief engineer. On server, workstations and smartphone. Listed in the Russian software registry (Mincifry №15057).
Built for heavy industry — not light machinery.
We focus where downtime is most expensive: rotating equipment in extraction, processing, and energy — plus cross-industry solutions that work at any plant.
From extraction and crushing through grinding, flotation, thickening and tailings. Vibration diagnostics, current diagnostics and APC optimization at every process stage.
From extraction and feed conditioning through distillation, hydroprocessing, petrochemicals and tank farms. Vibration and current diagnostics on critical pumps and compressors, plus APC on key units.
Thermal, hydro and renewable generation, transmission and distribution. Vibration and current diagnostics on turbines, generators, pumps and auxiliary-circuit fans; APC on combustion, water-steam loops and the energy balance.
Vibration and current diagnostics with remaining-useful-life (RUL) forecasting — we spot defects 2–6 months before failure. The move to condition-based maintenance. No in-house diagnostics team? We run it remotely.
Cut your plant's energy bill — metering, specific-consumption norms and verified savings. From an energy audit to energy performance contracting (ESCO): pay out of what you save, with no upfront investment.
Vibration and current diagnostics, OEE and remaining-life forecasting for machine tools – from 1–2 machines to a holding-wide fleet. No in-house diagnostics team? We run it remotely.
Strix APC — an advisor on top of your process control system: soft sensors between lab samples, MPC loops, computer vision as a sensor. Less quality variation, fewer reagents and less fuel — the human stays in the loop.
What the asset is earning right now and where the money leaks: a loss waterfall in money, plan / actual / forecast, site comparison — on the owner's and CFO's phone, with no retellings and no manual reports.
News & resources
Full technical documentation — open access.
Hardware specs, integration guides, 4diac materials, developer references and Strix application docs. No signup, no lead capture — for the engineers on your maintenance team and your APCS integrators.
Install Liman-Tech on one machine.
Show ROI in 30 days.
Pick your most critical asset. We ship sensors, set up edge gateway, and deliver a baseline + first insight within four weeks. No platform commitment.
- Sensors and gateway shipped within 7 days
- On-site or remote commissioning
- Reliability report at the end of the pilot
Request received. Thank you!
We'll get back to you within one business day.